About Me

liang gong

Related Blogs

Blogs Home » Browse Blogs » Beware of Parts Deformation During the Use of Paddy Husker Equipment

Beware of Parts Deformation During the Use of Paddy Husker Equipment

 

In the process of using Paddy Husker(LIANGGONG) equipment, there are sometimes some minor problems. After repairing, it will not affect the subsequent use. However, in the fault of the equipment, the problem of part deformation is quite tricky. It is relatively difficult to deal with. In order to try to avoid the situation of deformation of parts in the process of using paddy husker equipment, we should try our best to solve this problem from many aspects.

1. Scientific design

It is necessary not only to fully consider how to realize the action of the paddy husker equipment and the strength of the parts, but also to properly arrange the various parts and components to improve the rigidity and deformation of the parts, and to improve the stress of the parts, and to reduce the deformation of the parts; When designing the mechanical parts of the paddy husker equipment, try to make the wall thickness of the parts uniform, and reduce the temperature difference during hot working, so as to reduce the deformation of the parts.

2. Carefully manufactured

When formulating the blank manufacturing process, it is necessary to pay attention to the problem of deformation and adopt various technological measures to reduce the residual stress of the blank. After the blank is made and during the subsequent processing of the paddy husker equipment, sufficient internal stress relief procedures must be arranged to reduce residual internal stresses in the part. In order to reduce the stress and deformation of the parts after processing in the paddy husker equipment, for more important or more complex parts, natural aging or artificial aging should be carried out after finishing. Some special precision parts, such as the indexing mechanism, should be arranged several times between the finishing operations.

3. Quality repair

Since the deformation of the paddy husker equipment parts is unavoidable, it is not only necessary to check the wear of the mating surface during the overhaul of the paddy husker equipment, and the mutual positional accuracy must be carefully checked and repaired. For this reason, when overhauling packaging machinery and equipment, reasonable maintenance standards should be established, and special measuring tools and special work tools should be designed that are simple, reliable and easy to operate.

4. Reasonable use

In the process of using paddy husker equipment, it must be strictly operated according to the regulations, avoiding overload operation and avoiding local high temperature as much as possible to reduce the occurrence of part deformation.

Click Paddy Separator to learn about more information.

 

Photos

1 album found
  • Beware of Parts Deformation During the Use of... 0 0 0 9 1

    1 photo